Low-E Glass Protective Film

Why Low-E Glass Needs Protective Film?

Low-E Glass Structure
Low-E Glass Structure

Low-emissivity (Low-E) glass features a delicate silver-based coating that provides excellent thermal insulation and energy efficiency.

However, during storage, transportation, and pre-processing stages, the exposed edges of off-line Low-E glass are highly susceptible to oxidation.

Contact with air and moisture can rapidly degrade the silver layer, leading to coating deterioration, reduced optical performance, and potential defects in subsequent processing such as:

To address this critical challenge, our Low-E glass protective films are applied specifically to seal the glass edges.

Manufacturing Specifications

Low-E Glass Protection Film Manufacturing Specifications
Parameter Specification
Material Patented material structure
Adhesive Type Pressure-sensitive adhesive FR-08-J7, FR-93T
Film Thickness Standard 120–190 μm or custom
Width 300 / 320 / 380 mm or custom
Length 100 m per roll or custom
Color Silver
Surface Printing Supports up to eight-color printing

Performance Testing

Low-E Glass Protective Film Performance Testing
Test Item Purpose
Oxygen Barrier Testing Evaluate resistance to oxygen transmission
Water Vapor Barrier Testing Assess moisture transmission through the film
Peel Adhesion Testing Measure bonding performance under specified conditions
Edge Sealing Evaluation Check sealing continuity and adhesion stability
Aging Resistance Testing Assess performance changes after controlled aging
Adhesive Residue Inspection Check removal behavior where removal is required
Thickness Uniformity Verify dimensional consistency across production batches

Get in Touch with Us

    FAQs

    Our standard Low-E glass protective film thickness ranges from 120 to 190 μm.

    Custom thicknesses are available to meet specific glass edge protection and processing requirements.

    Our protective film can be evaluated for single-silver, double-silver, and triple-silver offline Low-E glass.

    Film structure, adhesive selection, and sealing performance should be verified according to each customer's coating system and processing requirements.

    Patented structure with superior protection.

    Low-E glass protective films can be evaluated for oxygen and moisture barrier performance, peel adhesion, edge sealing stability, aging resistance, adhesive residue, and thickness uniformity.

    Its silver coating is highly sensitive and prone to oxidation, especially at exposed edges.

    It is applied before further processing, such as insulating or tempering.

    Yes, fully customizable solutions, from thickness, width, length and logo printing.

    Please provide your Low-E glass type, required film thickness, width, roll length, adhesive requirements, protection duration, and estimated order quantity for an accurate quotation.